Tires/Tubes

A good pair of valves can make a big difference in the reliability and ease-of-use for any tubeless setup. Whisky's No. 7 Brass tubeless valves help ensure your tires are dialed for every ride. And, it's always a good call to keep an extra valve in a pocket or bag. - For use with Whisky tubeless rims and most others - 40mm length - Fits up to a 8mm valve hole - Removable valve core - Sold as a pair

- Shim adds support to Presta stem used in a Schrader rim

The Verdict family presents our most aggressive front-focused tires for days where relentless traction takes priority over rolling efficiency. Tall, chunky knobs dig deep into soft terrain regardless of how loose or sloppy it may be. Abundant open space between all knobs gives them room to dig through the driest days of summer and fling mud in the wettest months. The Verdict family is guilty of holding it down through off-camber corners and chundery descents. Verdict is the do-it-all spike designed to handle loose, technical trails. Its toothy knobs dig into soft terrain and grapple through rocks and roots. Dry and dusty during the loose summer months in California, Colorado or Italy? Go with the Verdict. PAIR IT WITH A JUDGE The Judge 2.4 rear tire compliments their usage with equally robust knobs that emphasis claw-like braking traction while also keeping rolling efficiency in mind. Looking to keep the front upright while you steer with the rear? That’s what you get with the Verdict/Judge combo. TRITEC AND SLASH GUARD: Verdict and Verdict Wet feature TriTec Compound, which utilizes three rubber compounds to provide different levels of traction, support, and durability based on their placement within the tread. The entire tread pattern is supported by a base of supportive rubber, which transitions halfway into the height of the knobs and allows for the use of softer knob compounds without folding under cornering forces. The tops of the center knobs consist of an intermediate compound to provide traction and durability without sacrificing rolling efficiency. Outer knobs feature a soft compound that delivers maximum grip and slow rebound. All TCS Light versions of the new Verdict tires feature Slash Guard technology, which incorporates a protective nylon insert spanning the entire sidewall to provide extra protection without the weight of a dual-ply casing. Verdict Wet is only available with a TCS Tough casing, and therefore, isn’t available with Slash Guard. FEATURES: - The Verdict tread pattern excels in loosest, rowdiest conditions where relentless traction takes priority over rolling efficiency. - Abundant open space between all knobs allows the tread pattern to dig through the driest days of summer and fling mud in the wettest months. - Pair it with the Judge 2.4 as a rear tire for claw-like braking traction that matches the tenacious grip of the Verdict tread. - Optimized for use with i29 rims.

The Corsa has been the race-day choice of pros for years and is now better than ever with 4C Graphene compound technology! The latest Corsa is an evolution of the brand and brings multiple industry-first technologies to market. Starting with our supple yet durable 320 TPI Corespun-K reinforced casing and adding a proprietary mix of 4 different Graphene compounds, the new Corsa achieves the holy grail of performance: speed, suppleness, durability, and reliability. Whether winning a Grand Tour or a local crit, the Corsa family delivers world-class performance. - 4 separate Graphene compounds deliver speed, suppleness, durability, and reliability - Reinforced Corespun-K casing for increased sidewall protection - Folding bead

A versatile all-round tire for a combination of terrain that features a unique low-profile tread that is tightly spaced in the center, for low rolling resistance and durability. Countless effective edges work together to grip on a variety of terrain, while directional siping on each knob make traction in the roots and rocks. Using the proprietary Graphene enhanced 4-compound rubber, the Mezcal balances; grip, durability, and low weight. - Defined center-ridge tread for low rolling resistance - A multitude of effective braking and climbing edges - Low-profile, densely spaced knob configuration - Designed for all terrain types, from hard pack to mud to wet

The XCO European Champion tire The Mezcal is the versatile all-rounder that gets you to the podium, time after time. Ride a combination of terrain? This is the choice of the pros. The Mezcal features a unique, low-profile tread that is tightly spaced in the center for low rolling resistance and durability. Countless effective edges work together to grip a variety of terrain, while directional siping on each knob find traction in the roots and rocks. The best tires are built with the best casing and compound, and the Mezcal TNT is no exception. Using the proprietary Graphene enhanced 4C compound, the Mezcal attains the holy grail of XC tires; grip, durability, and low weight. - Defined center-ridge tread for low rolling resistance

Value priced smooth tread tire ready to handle just about any repair job. - Mountain tire designed for riding on blacktop or concrete - Semi Slick design with low rolling resistance

Made for tire widths from 30mm to 40mm and ready for rim brakes and disc brakes, the Tubo-CX/Gravel is twice as robust as standard tubes. At the same time, due to its low weight of 54g, it guarantees twinkle-toed rides. The 50% smaller packed size makes it easier to stuff a spare tube in every pocket.

Minimum weight and maximum protection: Tubo-MTB-Plus tubes are optimized for tire widths from 2.5" to 3.0", today’s standard for E-MTBs. Their low weight of 105g (for 27.5+) increases your battery life, and they're also a lightweight alternative to tubeless setups. - 42mm valve length

Super light at only 38g, the Tubo-ROAD-700c makes racing bikes even lighter. It's 70g lighter compared to a standard tube, a decisive success factor both over challenging long distances and when it comes to seconds. Suitable for disc and rim brake wheels.

GRAVEL Cannonball is a go-to gravel race tire for normal conditions. The tread pattern features a directional, tight-knit center tread that sheds dirt and debris to decrease rolling resistance, and side knobs for effective cornering traction. Cannonball is built for all-around gravel riders and racers. HOW IT WORKS - Center lugs are raised and ramped for rolling efficiency; the diamond-shaped lugs squeeze in for grip as they contact dirt, then back out to shed debris. - Transitions lugs are spaced out and vary in height to boost traction. - L-shaped side lugs dig in for grip while braking through corners, but roll quickly when off the brakes.

GRAVEL Sometimes the greatest journeys are full of memorable experiences: churning over towering mountain passes, trying to make it to the next town before the café closes, pedaling from sunrise to sunset, or sleeping in when you’re gifted with perfect weather and an incredible view from your tent. We designed the Sparwood around long-distance mixed-terrain routes, for riders seeking to experience the land, not just ride on it. HOW IT WORKS - Center lugs are raised and ramped for rolling efficiency; the diamond-shaped lugs squeeze in for grip as they contact dirt, then back out to shed debris. - Diamond- and chevron-shaped transition lugs feature staggered spacing and height to improve shedding and traction. - L-shaped side lugs dig in for grip while braking through corners, but roll quickly when off the brakes.

- Size: 29 x 2.1 – 2.3 - 4mm wall thickness in the tread area and 2mm in the rim area - ISO Diameter: 622 / road / 29" , 630 / 27" - ISO Width: 54mm, 55mm, 56mm, 57mm, 58mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Length: Short 32-40mm - Valve Shaft: Threaded - Weight: 681g

- ISO Diameter: 305 / 16" BMX - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Length: Short 32-40mm - Valve Shaft: Threaded - Weight: 76g (1.25-1.5), 88g (1.5-1.75)

- Low Lead Valve - ISO Diameter: 305 / 16" BMX - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Shaft: Smooth - Weight: 76g (1.25-1.5), 92g (1.5-1.75), 102g (1.75-2.125)

- ISO Diameter: 406 / 20" BMX - Tube Compound: Butyl - Wall Thickness: 0.9mm - Valve: Presta - Valve Shaft: Threaded - Valve Core: Removable

- ISO Diameter: 406 / 20" BMX - Wall Thickness: 0.9mm - Tube Compound: Butyl - Valve: Standard Schrader - Shaft Type: Smooth - Valve Core: Removable

- ISO Diameter: 507 / 24" BMX - Tube Compound: Butyl - Wall Thickness: 0.9mm - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded Note: This product may have different packaging than pictured with a slightly different labelled size. Rest assured, the size range on the package will have the same or a broader functional range as the listed sizing of the product you ordered.

- ISO Diameter: 507 / 24" BMX - Tube Compound: Butyl - Wall Thickness: 0.9mm - Valve: Standard Schrader - Shaft Type: Smooth - Valve Core: Removable

- Size: 26 x 1.5 – 1.75 - ISO Diameter: 559 / 26" mtn , 584 / 650b / 27.5" - ISO Width: 33mm, 34mm, 35mm, 36mm, 37mm, 38mm, 39mm, 40mm, 41mm, 42mm, 43mm, 44mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight 152g (32mm), 158g (48mm)

- Size: 26 x 1.9 – 2.125 - ISO Diameter: 559 / 26" mtn - ISO Width: 48mm, 49mm, 50mm, 51mm, 52mm, 53mm, 54mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 170g (32mm), 171g (48mm)

- ISO Diameter: 559 / 26" mtn - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Shaft: Smooth - Weight: 102g (1-1.25), 165g (1.5-1.75), 174g (1.9-2.125), 198g (2.1-2.3), 281g (2.4-2.75)

- ISO Diameter: 584 / 650b / 27.5" - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded

- ISO Diameter: 584 / 650b / 27.5" - ISO Width: 52mm, 53mm, 54mm, 55mm, 56mm, 57mm, 58mm - Labeled Size: 27.5 - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Length: Schrader - Valve Shaft: Schrader

- ISO Diameter: 622 / Road / 29" - Tube Compound: Butyl - Wall Thickness: 0.9mm - Valve: Presta - Shaft Type: Threaded - Valve Core: Removable

- Size: 29 x 1.9 – 2.3 - ISO Diameter: 622 / road / 29" - ISO Width: 48mm, 49mm, 50mm, 51mm, 52mm, 53mm, 54mm - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Shaft: Smooth - Weight: 226g

- ISO Diameter: 622 / road / 29" - Tube Compound: Butyl - Valve: Long Schrader - Valve Core: Removable - Valve Length: Schrader - Valve Shaft: Smooth

- ISO Diameter: 622 / road / 29" - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Length: Schrader - Valve Shaft: Smooth - Weight: 110g (23-25mm), 128g (28-32mm), 144g (35-43mm), 160g (40-45mm)

- Balloon tire with grooved tread - Large air volume for added shock absorption - Wire bead - Size: 26 x 2.125

• Balloon tire with grooved tread • Large air volume for added shock absorption • Wire bead • Size: 26 x 2.125